Mowing; Adjusting Nylon Line - Stihl FSA 130 R Manual De Instrucciones

11 Operating the Trimmer
► Push the release slide (1) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. After the third
performance level, it starts again with the first
performance level.
► Push the release slide (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.

11.3 Mowing

The cutting height is determined by the distance of the
cutting attachment from the ground.
► Swing the brushcutter evenly back and forth in an arc (A).
► If you are using a metal cutting attachment: Mow with the
left-hand side on the metal cutting attachment (B).
► Move forward slowly in a controlled manner.

11.4 Adjusting Nylon Line

11.4.1 Line Feed on AutoCut Mowing Head
► Tap the rotating mowing head on the ground.
About 30 mm of fresh nylon line is advanced. The line
limiting blade in the deflector trims the mowing lines to the
correct length.
0458-725-9821-C
A
2
Automatic feed does not operate if the mowing lines are
shorter than 25 mm.
B
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Depress the spool (1) on the mowing head and hold it
depressed.
► Pull out the mowing lines (2).
► If the mowing lines (2) cannot be pulled out to the required
length: Replace the spool (1) or the mowing lines (2).
The spool is empty.
11.4.2 Line Feed on SuperCut Mowing Head
Mowing lines are advanced automatically. The line limiting
blade in the deflector trims the mowing lines to the correct
length.
Automatic feed will not take place if the mowing lines are
shorter than 40 mm.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Pull out the mowing lines.
► If the mowing lines cannot be pulled out to required length:
Replace nylon line.
The spool is empty.
1
English
59