Tabla De Contenido - Hitachi Koki Tanaka TCH 27EPA (S) Instrucciones De Manejo

Cortasetos angular
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
English
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully
understand and observe the following
safety precautions and warnings. Careless
or improper use of the unit may cause
serious or fatal injury.
Read, understand and follow all warnings
and instructions in this manual and on
the unit.
Always wear eye, head and ear protectors
when using this unit.
Gloves should be worn when necessary,
e.g., when assembling cutting equipment.
Use anti-slip and sturdy footwear.
Do not touch the blade when running the
engine.
Choke - Run position (Open)
Choke - Start position (Closed)
Emergency stop
Hot surface - Burns to fi ngers or hands
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See "MAINTENANCE".
Index
WHAT IS WHAT ................................................................................ 5
WARNINGS AND SAFETY INSTRUCTIONS .................................. 6
SPECIFICATIONS ............................................................................ 7
ASSEMBLY PROCEDURES ............................................................. 7
OPERATING PROCEDURES ........................................................... 8
MAINTENANCE ................................................................................ 8
4
(Original instructions)
High-voltage current runs through overhead electric cables
and communication cables, etc. Under no circumstances
must the trimmer come into direct or indirect contact with
these cables during usage. The trimmer is not electrically
insulated, so failure to observe this may result in serious
injury or death.
Make sure all trimming work is carried out at least 10
meters away from such cables.
Keep all people, bystanders and helpers
15 m away from the unit. If anyone approaches
you, stop the engine and cutting attachment
immediately.
Tabla de contenido
loading

Tabla de contenido