Citizen CT-S651 Type II Manual De Usuario página 8

Do not use the printer under the following conditions.
 Avoid locations subject to vibration or instability.
 Avoid locations where the printer is not level.
• The printer may fall and cause an injury.
• The quality of printing may deteriorate.
 Do not obstruct the printer's air vents.
 Do not place anything on the printer.
 Do not cover or wrap the printer in cloth or blankets.
• Doing so could cause heat to build up and deform the case or start a
fire.
 Avoid using the printer near a radio or TV set or from supplying it from
the same electric outlet as these appliances.
 Avoid using the printer interconnected with a cable or cord that has no
protection against noise.
twisted pair of cables and ferrite cores, or other anti-noise devices.)
 Avoid using the printer with a device that is a strong source of noise.
• The printer may have an adverse effect on nearby radio or TV
transmissions.
appliances adversely influence the printer, causing data errors or
malfunction.
 Installed in any orientation other than those specified.
• Malfunction, failure, or electric shock may result.
 Connect the printer to a ground.
• Electric leakage may cause an electric shock.
 Do not connect the printer's ground to any of the following:
* Gas piping
• A gas explosion could result.
* Telephone line ground
* Lightning rod
• If lightning strikes a large surge of current may cause fire or
shock.
* Water pipes
• Plastic water pipes should not be used for grounding. (Those
approved by a Waterworks Department may be used.)
 Before connecting or disconnecting the grounding lead to or from the
printer, always unplug it from the electric outlet.
(For interconnections, use shielded or a
There may also be cases when nearby electrical
CAUTION
— 4 —