Lan Setup Settings (Printer With Triple Interface Model) - Oki PT340 Manual De Instrucciones

9-4. LAN Setup Settings (Printer with triple interface model)

Ensure that paper is set in the printer. Turn off the power switch on the printer,
then turn it on again while pressing the FEED button on the control panel. This
outputs the printout shown in section 9-1.
Then Press the FEED button three times (to select 3. LAN Setup Menu)
enters setup mode and prints the following menu.
LAN Setup Menu
1.Setting
2.Setup Print
3.Save & End
4.Default Set
5.DHCP IP Address Print
<Set>
Press FEED button for the number of times
as the same as your selecting item, and
wait more than 1 second.
<Return>
Continue to press FEED button more than
1 second.
Settings have the same operation method as described in paragraph 9-2.
60