After Usage - MESTO FERRUM PLUS 3560P Instrucciones De Uso

GB IRL
Spraying
Observe the instructions in the chapter entitled „Safety".
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
1. Suspend the device from your shoulder or place it on your back. (Figs. 12 or 13)
+
To prevent dripping, hold the spray lance up when first spraying and activate the shut-
off valve until no more liquid mixed with air is emerging.
2. Activate the shut-off valve [8]. (Fig. 14)
► Spraying may now begin.
3. Make certain the optimum spraying pressure is set (→ Table 2) on the
pressure gage [14].
Spraying pressure
1.5 bar
2.0 bar
3.0 bar
Table 2 Linear relationship of: spraying rate and spraying pressure
4. If the spraying pressure decreases more than 0.5 bar from the optimum level,
pump some more.
+
If liquid mixed with air emerges from the nozzle, the tank is empty.

After usage

Observe the instructions in the chapter entitled „Safety".
Never leave spraying agent in the device.
1. Pull up the red button on the safety valve [10] until all excess pressure is released from
the tank. (Fig. 4)
2. Lock the pump handle in place [11]. (Fig. 5)
3. Unscrew the pump [4] from the tank [2]. (Fig. 6)
Collect and dispose of the residual liquid according to all applicable laws,
requirements and regulations. Observe the instructions of the spray product
manufacturer!
4. Empty and rinse the device with clear water.
5. Wipe off the device with a moist cloth.
6. For drying and storing the device, keep the tank and pump separate in a dry place
protected from sunlight and freezing temperatures.
Clean the protective equipment and yourself every time after usage.
AUS USA
Spraying quantity with nozzle 1302
17
NZ CDN
0.56 l/min
0.64 l/min
0.78 l/min
IND