Idiomas disponibles
Idiomas disponibles
Assembly & Set-Up
3
Contents of Carton
One Lawn Mower
One Lawn Mower Operator's
Manual
One Grass Catcher
One Engine Operator's
Manual
One Bottle of Oil
Assembly
NOTE:This unit is shipped without gasoline or oil in the engine.
Fill up gasoline and oil as instructed in the accompanying engine
manual BEFORE operating your mower.
Handle
1.
Remove any packing
material
which may be between
upper and lower handles.
a.
Pull up and back on upper handle as shown in Fig.
3-1. Make certain the lower handle is seated securely
into the handle
mounting
brackets.
Do not crimp
cable while lifting
the handle up.
2.
Insert a carriage bolt from the hardware
pack into the
upper hole on the handle mounting
bracket. Secure with
one plastic wing nut, also included
in the hardware
pack.
See Fig. 3-2. Repeat on other side with
remaining
items
from hardware
pack.
Hardware
Pack
Carriage
Bolts
(2)
Wing Nuts (2)
Figure 3-2
J
Figure 3-1
b.
Tighten
star knobs securing
upper handle to lower
handle. See Fig. 3-1. Make sure that each carriage
bolt is seated properly
in the handle.
