EGO ST1500E Manual Del Usuario página 8

MOUNTING THE GUARD
EN
WARNING:
Always wear gloves when mounting or replacing the guard. Take
care of the blade on the guard and protect your hand from cutting.
WARNING:
Always remove battery the pack from the product when you are
assembling parts, making adjustments, cleaning, or when the product is not in use.
1. Remove the battery pack from the
trimmer.
2. Loosen the two bolts in the guard
with the M5 hex wrench; remove
the bolts and spring washers from
the guard (Fig. 1).
3. Lift the trimmer head and face it
downward; align the two mounting
holes in the guard with the two
assembly holes in the base of
the shaft. Make sure the internal
surface of the guard faces towards
the trimmer head (Fig. 2).
4. Lock the guard in place with the
bolts and the M5 hex wrench
(Fig. 3).
14
56 VOLT LITHIUM-ION CORDLESS BRUSHLESS STRING TRIMMER — ST1500E
1
2
3
MOUNTING AND ADJUSTING THE FRONT-ASSIST HANDLE
WARNING:
Always remove battery the pack from the product when you are
assembling parts, making adjustments, cleaning, or when the product is not in use.
1. Remove the battery pack from the
trimmer.
2. Loose the wing nut by hand
and remove the wing nut,
lock pole, clamping block from the
handle (Fig. 4).
3. Align the slot of the front-assist
handle with the shaft, and push the
handle in place, as shown in Fig. 5.
WARNING:
Only fix the front-assist
handle in front of the soft sleeve on the
shaft.
4. Insert the clamping block into the
slot of the front-assist handle, and
push it in place, as shown in Fig. 6.
56 VOLT LITHIUM-ION CORDLESS BRUSHLESS STRING TRIMMER — ST1500E
4
Front-Assist Handle
Lock Pole
Clamping
Block
Wing Nut
5
6
15
EN