Connect The Base Unit - Amplicomms PowerTel 2880 Manual De Instrucciones

strength depends on the base unit's location. The maximum
range is 300 m based on an unobstructed line of sight; the
range is shorter inside buildings because of walls and other
obstacles.

Connect the base unit

1. Plug the connector on the cable end into the corresponding
jack on the underside of the base and plug the power
adaptor into the wall socket.
2. Plug the small connector on the end of the telephone line
cord into the corresponding jack on the base and plug the
other end into the telephone jack.
3. Connect the receiver with the telephone using the coiled
receiver cord.
Note: Guide the connection cables through the strain-relief tabs
on the base so the unit sits flush with the desk.
For pluggable equipment, the socket-outlet (power adaptor)
shall be installed near the equipment and shall be easily
accessible.
Helpline 0844 800 6503 (See page 51 for costs and hours of operation)
5