Other Functions; Setting The Time Display On Or Off - Pioneer Premier DEH-340 Manual Del Usuario

Other Functions

Setting the time
This is used to set the time on the unit's clock
display.
1 Press
SOURCE
off.
2 Press and hold until
AUDIO
in the display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
• To cancel time settings, press
• You can also cancel time settings by holding
down until the unit turns off.
AUDIO
15 En
and hold until the unit turns
appears
TIME
.
BAND

Setting the time display on or off

You can turn the time display on even when the
sources and the demonstration are off.
Press to select the time display.
CLOCK
Each press of
CLOCK
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
turns time display on or