Functional details
Water and cleaning / care products system
Water can be connected at mains pressure to the high pressure pump. The water is
then forced under pressure by the high pressure pump to the lance. The high pressu-
re jet is formed by the nozzle at the end of the lance.
Environmental, refuse disposal and water protection regulations must
be observed!
Lance with trigger gun with safety catch
The machine can only be operated when the trigger of the trigger gun with safety
catch is pulled. When the trigger is pulled, the trigger gun opens. The liquid is then
pumped to the nozzle. The spray pressure increases and quickly reaches the selec-
ted operating pressure. When the trigger is released, the trigger gun closes and any
further spraying of liquid from the lance is stopped. The pressure thrust serves to clo-
se the start/stop system, thus causing interruption of the energy supply to the motor.
Owing to this innovative system the high pressure hose is relieved and enables higher
durability of the hose. Opening the gun causes the start/stop system to open, the
electric motor is automatically restarted and the pump starts to transfer the water
on to the high pressure jet where the cleaning jet is generated.
The trigger gun with safety catch is a safety device. Repairs should only
be performed by qualified persons. Should replacement parts be re-
quired, use only components authorized by the manufacturer.
Replacements, repairs, new adjustments and sealing should only be
performed by qualified persons.
Prior to putting the machine into operation make sure that all safety
instructions be observed.
38