Sanyo AVM-1341S Manual Del Propietário página 6

QuickTips
Point the remote
control toward the
TV. Objects between
the remote control
and the TV may
cause misoperation
of the remote control
function.
Make sure the
batteries have been
installed correctly.
Cannot select
channel with number
keys. Press "0" in
front of numbers
1 ~ 9. Example:
Channel "05."
The "C" in front of
the channel number
indicates a Cable
channel.
Channel number
cannot be displayed
continuously when
captioning is on.
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing
arrow indicates
volume is decreasing.
This remote control
has glow-in-the-dark
Power, Channel, and
Volume keys.
Using V-Guide
TV Parental Guide-
lines settings can
be changed only
by using the
Remote Control.
See pages 12 and 13.
6
REMOTE CONTROL KEYS
Point towards TV
GAME
POWER
MODE
VIDEO
MODE
1 2
5
4
7
8
CAPTION
0
MENU
VOL
CH
MUTE
V-GUIDE
Game / Video Mode Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A/V jacks.
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels
100 through 125, press and hold the
1 key until C1– – appears. Then press
the other two numbers.
RESET
3
6
9
SLEEP
RECALL
11
VOL
DISPLAY
12
11
12
Caption Key (See page 10.)
Menu Key
Use this key with the
/ keys to navigate and adjust
features of the on-screen menu system
(see pages 7 and 8).
Channel Scanning (CH
and Volume (VOL /
Press to scan through the channels in
memory and to adjust the volume.
Mute Key
Press once to minimize the volume.
Press again to restore.
V-Guide Key (See pages 11 ~ 13.)
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all
customized settings (see page 8).
Power Key
Press to turn TV on or off.
Sleep Key
Use this key with the "0" key to set the
Sleep Timer (see page 9).
Recall Key
Select a channel then select another
channel using the number keys. Press
Recall to switch between the channels.
Display Key
Press once to display the channel
number. Press twice to display the
channel number continuously. Press
again to remove the display.
/ and
/ )
) Keys