Playing specific tracks only
You can select:
•BANK-ON - to play the tracks with the
"PLAY" setting.
•BANK-INV (Inverse) - to play the tracks with
the "SKIP" setting.
1
During playback, press (SHIFT), then
press (4) (PLAY MODE) repeatedly until
"BANK" appears.
2
Press (5) (n) to repeatedly until the
desired setting appears.
z BANK-ON
Playback starts from the track following the
current one.
3
Press (SHIFT).
To return to normal playing mode, select
"BANK-OFF" in step 2 above.
26
z BANK-INV
z BANK-OFF
Additional
Information
Precautions
• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
• If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
• If no sound comes from the speakers of
2-speaker systems, set the fader control to the
centre position.
•If your car is equipped with a power aerial, it
will extend automatically while the unit is
operating.
•Connecting this unit may cause some car
battery wear when your car has no ACC
(accessory) position on the ignition key
switch.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
Notes on handling CDs
A dirty or defective disc may cause sound
dropouts while playing. To enjoy optimum
sound, handle the disc by its edge. To keep the
disc clean, do not touch the surface.
Do not stick paper or tape on the labelled
surface.