Using Smart Diagnosis - LG WM22RV2S6 El Manual Del Propietario

Smart Diagnosis™ Using a Smart Phone
• For appliances with the
Use this function if you need an accurate diagnosis by
an LG Electronics customer information centre when the
appliance malfunctions or fails.
Smart Diagnosis™ can not be activated unless the
appliance is connected to power. If the appliance is
unable to turn on, then troubleshooting must be done
without using Smart Diagnosis™.

Using Smart Diagnosis™

Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate diagnosis by
an LG Electronics customer information center when the
appliance malfunctions or fails. Use this function only
to contact the service representative, not during normal
operation.
1
Press the Power button to turn on the washing
machine. Do not press any other buttons or turn
the cycle selector knob.
2
When instructed to do so by the call centre, place
the mouthpiece of your phone close to the Power
button.
3
Press and hold the Temp. button for 3 seconds,
while holding the phone mouthpiece to the icon or
Power button.
34
or logo
4
Keep the phone in place until the tone transmission
has finished. Time remaining for data transfer is
displayed.
• For best results, do not move the phone while
the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones have
stopped, resume your conversation with the call
centre agent, who will then be able to assist you
using the information transmitted for analysis.
NOTE
• The Smart Diagnosis™ function depends on the
local call quality.
• The communication performance will improve and
you can receive better service if you use the home
phone.
• If the Smart Diagnosis™ data transfer is poor due
to poor call quality, you may not receive the best
Smart Diagnosis™ service.