Cleaning the Dispenser Drawer
Detergent and fabric softener may build up in the
dispenser drawer. Remove the drawer and inserts and
check for buildup once or twice a month.
1
Remove the detergent dispenser drawer by pulling
it straight out until it stops.
• Press down hard on the disengage button and
remove the drawer.
2
Remove the inserts from the drawer.
• Rinse the inserts and the drawer with warm
water to remove buildup from laundry products.
Use only water to clean the dispenser drawer.
Dry the inserts and drawer with a soft cloth or
towel.
3
To clean the drawer opening, use a cloth or small,
non-metal brush to clean the recess.
• Remove all residue from the upper and lower
parts of the recess.
4
Wipe any moisture off the recess with a soft cloth
or towel.
5
Return the inserts to the proper compartments and
replace the drawer.
Limpieza de la tina (Tub Clean)
Tub Clean is a special cycle to clean the inside of the
washing machine.
A higher water level is used in this cycle at higher spin
speed. Perform this cycle regularly.
1
Remove any clothing or items from the washing
machine and close the door.
2
Open the dispenser drawer and add Anti limescale
(e.g. Calgon) to the main wash compartment.
3
Close the dispenser drawer slowly.
4
Power On and then select the Limpieza de la tina.
Then '
' will be displayed on the display.
5
Press the Start/Pause button to start.
6
After the cycle is complete, leave the door open to
allow the washing machine door opening, flexible
gasket and door glass to dry.
CAUTION
• If there is a child, be careful not to leave the door
open for too long.
NOTE
• Do not add any detergent to the detergent
compartments. Excessive suds may generate and
leak from the washing machine.
37