Hitachi DH 24PA Instrucciones De Manejo página 8

English
13 mm Hammer drill chuck
For drilling operations when using a straight shank bit for impact drilling with a hammer drill.
Straight shank bit
(
for impact drill
2. Anchor setting
Anchor setting adapter (for electric hammer drill)
Anchor setting adapter (SDS-plus shank)
(for electric hammer drill)
Overall length: 160, 260 mm
Anchor setting adapter (for manual hammer)
3. Large hole boring (rotation + striking)
Center pin, core bit, core bit shank and guide plate.
(Guide plate) Center pin
Center pin
–
Center pin (A)
Center pin (B)
Do not use core bits with
outer diameter of 25 mm
and 29 mm.
7
13 mm Hammer drill chuck
)
(SDS-plus shank)
Chuck wrench
Anchor size
W1/4"
W5/16"
W3/8"
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
Core bit
Core bit (outer diameter)
(A)
(B)
with guide plate
(The guide plate is not equipped with core bits
with outer diameter of 25 mm and 29 mm.)
Anchor setting adapter
(for manual Hammer)
Core bit shank
(SDS-plus shank)
25 mm
29 mm
32 mm
35 mm
38 mm
45 mm
50 mm
Core bit shank
Core bit shank (A)
Core bit shank (B)