Care And Storage; In The Event Of Problems; Technical Data - Beurer MG 48 Instrucciones Para El Uso

Aparato de masaje con infrarrojos
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

7. Care and storage

Cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly
moistened. You can also use a mild detergent.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.

8. In the event of problems?

Problem
Massage head does
not move.

9. Technical data

Dimensions (W/H/D)
Weight
Rated output
Rated voltage
Cause
Appliance not connected
to the power supply.
Device is not does not move. Switch on the appliance.
Overheating protection
tripped.
~ 95/150/380 mm
~ 980 g
20 W
230 V ~ 50 Hz
Remedy
Connect the plug to the mains supply and
switch on the appliance.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
9
Tabla de contenido
loading

Tabla de contenido