Bosch PFS 3000-2 Manual Original página 21

Symbols and their meanings
Step 3:
Setting the air flow
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for spraying all common paints:
Emulsion and latex paints (wall paints), solvent-based and
water-dilutable (recommended) lacquers, glazes, primers,
impregnations, clear lacquers (ALLPaint), oils and water.
The power tool is not suitable for use with caustic solutions,
wood stains, acidic coating materials, disinfectants, pesti-
cides and house paints.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spray gun
(2) Air cap
(3) Cap nut
(4) Thumbwheel for spray material volume
(5) Trigger switch
(6) Lock ring
(7) Container for spray material
(8) Spare container for spray material
(9) Hose port (spray gun)
(10) Nozzle cap (white: For "wall" application)
(11) Nozzle cap (grey: For "wood" application)
(12) Filling sieve
a)
(13) Transfer bucket
(14) Nozzle needle
(15) Container seal
(16) Suction tube
(17) Ventilation hole
(18) Paint channel
(19) Air hose
(20) Bayonet lock
(21) Base unit
(22) Carrying strap
(23) Carrying handle
(24) Pin
Bosch Power Tools
(25) Sliding switch for switching on/off and for air flow
control
(26) Air filter cover
(27) Cleaning brush
(28) Elastic band (hose holder)
(29) Hose port (base unit)
(30) Accessory compartment
(31) Air filter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Fine-spray system
Article number
Rated power input
Spraying capacity
Required time for application of
paint on 2 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
a)
Noise/Vibration Information
Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 80 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-1:
a < 2.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Detailed description
W
ml/min
min
2
ml
m
kg
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s
1 609 92A 685 | (09.09.2021)
English | 21
PFS 3000-2
3 603 B07 1..
650
300
1
1000
2
3.3
/ II