Product Warranty - Hamilton Beach Rio HBB250 Manual De Uso

Maintenance
Inspect the blender and its various parts and replace as follows:
Daily Unplug the blender and remove the container from the base, and then inspect the container and
cutter unit assembly for wear, nicks, and broken or loose blades. Replace if necessary. If the
cutter assembly blades are loose, discontinue use immediately and replace the cutter assembly.
Do not attempt to repair or tighten the cutter assembly. See "Replacement Parts" below.
Weekly Unplug the blender, and then inspect the power cord insulation and power plug for cracks.
Refer to "Requesting Assistance or Service" for repair or replacement.
Quarterly Replace the cutter unit assembly at least every 90 days. See "Replacement Parts" below.
Replacement Parts for Models HBB250 and HBB250S
For replacement parts, call toll free: 866-285-1087.
Part Description
44 oz. Polycarbonate Container
32 oz. Stainless Steel Container
Cutter Unit Assembly (Rubber Clutch)
This product is warranted to be free from defects in material and workmanship for a period of two (2) years from the
date of original purchase, except as noted below. During this period, we will repair or replace this product, at our
option, at no cost to you. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY OR CONDITION,
WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING WITHOUT LIMITATION ANY STATUTORY
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY
LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS
FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is no warranty
with respect to parts subject to wear, including without limitation: motor brushes, container and cutter assembly,
clutches, bristle brushes, funnel, stainless steel cup, agitators, carafes, etc. This warranty extends only to the original
purchaser and does not cover any condition resulting from abuse, misuse, neglect, unauthorized repair, or use not in
conformity with the printed directions. Always use this product in accordance with the printed directions. This warranty
gives you specific legal rights and you may also have other legal rights which vary from state to state, or province to
province. Some states do not allow limitations on implied warranties or special, incidental or consequential damages,
so the foregoing limitations may not apply to you.
If you have a claim under this warranty please contact our TECHNICAL SERVICE DEPARTMENT at
1-866-285-1087 or 910-693-4277. (For faster service please have model, series, and type numbers ready
for operator to assist you.) Reasonable proof of date of purchase must be presented; otherwise the effective
date of the warranty will be based upon the date of manufacture plus ninety (90) days.
Hamilton Beach/Proctor-Silex, Inc.
Commercial Technical Service
261 Yadkin Road
Southern Pines, NC 28387

Product Warranty

This Warranty supercedes all other Product Warranties
LIMITED WARRANTY
Caring for the Blender
Part Number
6126-250
6126-250S
98250
09/05
9