Panasonic CS-S9VKV-2 Instrucciones De Operación página 24

Troubleshooting
When...
■ The remote control is missing or a malfunction has occurred
1. Raise the front panel.
2. Press the button once to use in AUTO mode.
3. Press and hold the button until you hear 1 beep, then release to use in
4. Press the button again to turn off.
AUTO
OFF/ON
■ The indicators are too bright
• To dim the power indicator and the timer indicator while extinguishing other indicators,
press the button for 5 seconds; to restore the brightness of all indicators, repeat this
procedure.
■ Conducting a seasonal inspection after extended non-use
• Check the remote control batteries.
• Check that there is no obstruction around the air inlet and outlet vents.
• Use Auto OFF/ON button to select COOL operation. After 15 minutes of operation, it is
normal to have the following temperature difference between the air inlet and outlet vents:
COOL: ≥ 8 °C / 14,4 °F
■ The units are not going to be used for a long period of time
• Separately activate NANOE operation for 2~3 hours to remove moisture left in the internal
parts thoroughly to prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
NON SERVICEABLE CRITERIAS
TURN OFF THE POWER SUPPLY AND UNPLUG then please consult an authorised
dealer when in following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
24
ACXF55-21790_FC1806-00_S .indb 24
forced COOL mode.
2019/4/24 10:12:55