Urmet 1092 Manual De Usuario página 16

INSTALLATION

Make sure that no units are powered before starting the installation procedure.

Unscrew the fixing base from the ring lock to separate the camera, as in figure.

Fix the base to the surface with 4 screws. If it is not planned an hidden installation of connection
cables, use the slot present on the base to draw out the connection cables present on the camera
body, without pinching them, in order to avoid malfunction.

Bring the cover near the fixing base and screw the ring lock to the fixing base without tightening.
 Adjust the camera slant as regards the desired image capture point.

Connect the video output to the utility.

Power the camera.
OPERATING FEATURES
The camera may be operated only using the UTC controls available on the DVR/HDVR of the Urmet
catalogue implementing the function. Refer to the complete product documentation on the Urmet website to
check for the list of available devices.
These controls can be used to access the OSD menu.
Refer to the respective product manuals for using the controls.
16
Mount fixing screw
Camera body
Protective
dome
DS1092-544A