Beam Menu - Yamaha YSP-900 Manual De Instrucciones

Ocultar thumbs Ver también para YSP-900:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BEAM MENU

Use to manually adjust various parameters related to the
sound beam output.
SET MENU → MANUAL SETUP → BEAM MENU
2)BE M MENU
)SETTING P R METERS
B)BE M
C)IM GE LOC TION
[ ]/[ ]:Up/Down
[ENTER]:Enter
y
You can adjust the sound beam output level of each channel in
"ADJUSTING THE AUDIO BALANCE" (see page 68).
SETTING PARAMETERS
(Setting parameters)
Use to set the position of this unit in your listening room
and the distance of this unit from the listening position.
When you make settings for each parameter, other related
parameters are automatically adjusted to best match your
listening environment.
Note
If you make adjustments in SETTING PARAMETERS, the beam
optimization settings made in the AUTO SETUP procedure will
be lost. If you want to keep the beam optimization settings made
in the AUTO SETUP and make further adjustments, adjust
settings in BEAM ADJUSTMENT first (see page 60).
A)SETT NG PARAMETERS 1/3
.
NSTALLED POS T ON
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
INSTALLED POSITION
(Installed position of this unit)
Use to adjust the installed position of this unit.
Choices: FLAT TO WALL (Parallel to wall installation),
ANGLE TO WALL OR CORNER
(Corner installation)
FLAT TO WALL
DJUSTMENT
FLAT TO WALL
p
ANGLE TO WALL
OR CORNER
• Select FLAT TO WALL if this unit is installed in
parallel with the wall in your listening room. Adjust the
width and length of your listening room as well as the
distance of the listening position from this unit and the
distance of the center of this unit from the left wall.
Listening position
from the left wall
Room length
Room width
Choices for the room width and length:
2.0 m to 12.0 m
Choices for the listening position from this unit:
1.8 m to 9.0 m
Choices for the listening position from the left wall:
0.6 m to 11.4 m
Room width and length
Listening position from the
unit and the left wall
MANUAL SETUP
Listening position
from the unit
)SETTING P R METERS 2/3
|
-------[ 5.4m ]-
|
4.9m
|
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)SETTING PARAMETERS 3/3
|
2.7m [ 2.5m ]
|
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
59
En

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido