Using The Cushion - Invacare Propad Manual Del Usuario

IMPORTANT!
Accidental cover damage allows fluid ingress and
staining.
– Do not place sharp objects on the cover.
– When using patient transfer aids, ensure not to
damage the cover. Check for sharp edges or
burrs before use.
– Ensure that the cushion is not jammed or
damaged by sharp edges when used on
wheelchairs.
– Avoid burning cigarettes or open flames near
the cushion.
– If pets are around, ensure that no claws
puncture the cover.
IMPORTANT!
The water resistant cover allows fluids to roll off
the surface, however with sustained periods of
fluid contact the cover may absorb moisture.
– Wipe away any fluid as soon as it is identified.

4.2 Using the cushion

1. Remove all packaging before use.
2. Place the cushion on the seat surface with the zip
preferably towards the rear.
5 Maintenance
5.1 Inspection
Check cushion (foam and cover) for strike-through (this may
include fluid ingress, stains, rips or damage) after the use of
each patient and on a minimum monthly basis (depending
on which occurs first) by a suitably qualified and competent
person.
Check cushions
1. Unzip the cover completely.
2. Check for any staining on the interior foam.
3. Replace any damaged cover or stained foam and dispose
of as per local authority procedure.
5.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.),
abrasive cleaning agents or solvents (cellulose
thinner, acetone etc.). We recommend a mild
detergent.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
1590567-D
PRE-RELEASE D~00
Cleaning Intervals
Cleaning Instructions
Cleaning Cover
(Removal of contaminants such as dust and organic matter)
1. Remove cover for laundering.
2. Launder the cover using a diluted detergent solution
Drying Cover
1. Hang cover from a line or bar and drip dry in a clean
Disinfection Instructions
Disinfecting cover
(Reducing the number of microorganisms)
1. Wipe down the cover with a suitable detergent.
2. Rinse the cover thoroughly with clean water using a
3. Dry the cover thoroughly.
Replacing Cover
1. Unzip the cover and remove it carefully from the foam
2. Place new cover onto the foam core.
3. Close the zipper. Ensure the sliders are positioned at the
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
(Instructions and maximum temperature on label).
indoor environment.
or
Tumble dry on a low heat setting.
IMPORTANT!
– Tumble dry setting must not exceed 40 °C.
– Do not tumble dry for longer than 10 minutes.
– Dry thoroughly before use.
IMPORTANT!
– Only use disinfectants and methods approved
by your local infection control institution and
follow your local infection control policy.
single use nonabrasive cloth.
Heavy Soilage
When badly soiled, we recommend cleaning
with a diluted detergent solution at maximum
temperature in the washing machine.
– Clean up all spillages of bodily fluids i.e. blood,
urine, faeces, sputum, wound exudate and all
other bodily secretions as soon as possible using
a suitable detergent.
– Large spillages of blood should be absorbed
and removed with paper towels first, followed
by as above.
core.
Ensure that the corners of the foam core are positioned
correctly into the corners of the cover.
rear of the cushion.
WARNING!
– In event of contamination, contact your hygiene
specialist.
– Remove contaminated foams from use.
3