Lubricating Gearbox; Replacing The Starter Rope; And Rewind Spring - Stihl HS 75 Manual De Instrucciones

Lubricating
Gearbox
1
2
Use STIHL gear lubricant for hedge
trimmers (see "Specifications")
to lubricate the blade drive gear about
every 25 hours of operation.
:
Remove screw plug (1) from gear
housing.
:
Screw the tube of grease (2) into the
filler hole.
:
Roll up the end of the tube to the
next division on the scale. This
forces about 3/4 oz (20 g) grease
into the gearbox.
:
Refit screw plug and tighten
securely.
HS 75, HS 80

Replacing the Starter Rope

and Rewind Spring

1
2
1
1
:
Remove the screws (1).
:
Lift the starter cover (2) off the
engine (3).
3
4
:
Take out the screw (4).
:
Remove the rope rotor very
carefully – the rewind spring is
seated in the rope rotor and may
pop out, uncoil and cause injury
if care is not taken.
English / USA
19