Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Starting the Saw
WARNING
Bystanders must be well clear of the
general work area of the saw.
Press the manual fuel pump bulb at
N
least ten times – even if the bulb is
already filled with fuel.
Push the hand guard forward – the
N
chain is locked.
36
3
2
Press down the trigger lockout (1)
N
and pull the throttle trigger (2) at the
same time. Set Master Control
lever (3) to starting throttle
position (n).
Set choke lever to required position.
N
Choke shutter closed (l)
4
if the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
Choke shutter open (j)
1
if the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
When engine begins to fire
Move the choke lever (4) to the
N
open position (j).
Hold and start your saw as
N
described.
4
4
MS 193 C
Capítulos
Tabla de contenido
