Maintaining And Sharpening The Saw Chain - Stihl MS 194 T Manual De Instrucciones

English
Removing
2
Remove the spark plug boot (1).
N
Unscrew the spark plug (2).
N
3
2.
Insert the locking strip (3) sideways
N
in the cylinder (1) and then turn it
through 90° (2).
Rotate the clutch clockwise as far as
N
stop
Loosen the clutch hexagon
N
clockwise (left-hand thread).
Unscrew the clutch.
N
42
Pull the chain sprocket (4) and
N
needle cage (5) off the crankshaft.
Clean the crankshaft stub and
N
needle cage, and lubricate with
STlHL grease (special accessory).
Assembling
Push the needle cage and chain
N
sprocket onto the crankshaft.
1.
Screw the clutch onto the
N
crankshaft (counterclockwise).
Tighten down the clutch firmly.
N
Remove the locking strip from the
N
cylinder. Fit the spark plug and
tighten it down firmly.
Refit boot on the spark plug.
N
Maintaining and Sharpening
the Saw Chain
Sawing effortlessly with a properly
sharpened saw chain
A properly sharpened saw chain cuts
through wood effortlessly even with very
little pushing.
Never use a dull or damaged saw chain
– this leads to increased physical strain,
increased vibration load, unsatisfactory
cutting results and increased wear.
Clean the saw chain
N
Check the saw chain for cracks and
N
damaged rivets
Replace damaged or worn chain
N
components and adapt these parts
to the remaining parts in terms of
shape and level of wear – rework
accordingly
Carbide-tipped (Duro) saw chains are
especially wear-resistant. For an optimal
sharpening result, STIHL recommends
STIHL servicing dealers.
WARNING
Compliance with the angles and
dimensions listed below is absolutely
necessary. An improperly sharpened
saw chain – especially depth gauges
that are too low – can lead to increased
kickback tendency of the chain saw –
risk of injury!
MS 194 T