Choke Control; Blade Switch; Ignition Switch; Service Meter - Jonsered Z42F Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CONTROLS

Choke Control

The choke control is used for cold starts to
provide the engine with a richer fuel mixture.
For cold starts, pull the control up.

Blade Switch

To engage the mower deck blades, pull the knob
up; the blades are disengaged when the knob is
pressed down.

Ignition Switch

The ignition switch is placed on the control panel
and is used to start and stop the engine. On
models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
14

Service Meter

The service meter displays the total number of
hours the engine has run and indicates when the
engine and mower need servicing.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before
an automatic reset occurs. To manually reset
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.
Note: The service meter operates (clocks hours)
only when the engine is running. Be sure to turn
the key off when the unit is not in use, to prevent
meter hours from accumulating.

Seat Adjustment Lever

The seat can be adjusted lengthways. When
making adjustments, the lever under the right side
of the seat is pulled up, after which the seat can
be moved backward or forward.
IMPORTANT INFORMATION The
not be adjusted while unit is in motion.
seat must
Tabla de contenido

Solución de problemas

loading

Tabla de contenido