How To Switch The Raid Mode - Stardom SOHORAID SR2 Serie Manual Del Usuario

Step 6 Power on the unit and wait for the system to initialize. When the LCD display panel
English
indicates "OK", the system has completed initialization and is ready for hard drive
formatting.
Deutsch
Français
Español
When the SR2 has completed initializing, your computer's operating system should
中文
recognize the device automatically. Please follow the formatting instructions given by the
operating system to format the drives. Once the formatting has been completed, the system
日本語
is ready for use.
한국어

5. How to Switch the RAID Mode

The default setting of SOHORAID SR2 is RAID 1. To change the setting, please follow the
steps below:
Step 1 After turning on the power, press "ENT" when the screen below is displayed on the LCD.
Step 2 When the "Enter Password" screen appears, please enter "0000" (press ▼ or ▲ to
choose numbers, and then press "ENT").
Step 3 If you are sure to switch the RAID mode, press "ENT" to accept. If not, press "ESC".
Step 4 When the "RAID-0 MODE" appears on the LCD screen, press "ENT".
Step 5 When you switch the RAID mode, all data in the hard disk will be deleted. Press "ENT"
to accept, or press "ESC".
8
System initializing
STARDOM SR2
Booting...
PASSWORD
0000
CHANGE RAIDMODE
YES
RAID-0 MODE
YES
DATA WILL LOSE
YES
SOHORAID SR2 Series User Manual
Normal operational state
NO
NO
NO