Stardom SOHORAID SR2 Serie Manual Del Usuario página 11

During the data rebuilding process, the LCD panel will display the percentage progression
rate of the rebuild. Below are sample diagrams.
Data being rebuilt from Primary
to Secondary position at 10%
completion
Verification completed. Back to normal operational state
If during the rebuilding process, a drive malfunctions and is unable to continue the rebuilding
process, restart the SR2 to check and see that the drive is in fact malfunctioning. If it is, please
refer to chapter 5 "Hard Drive Replacement Instructions" to replace the malfunctioning drive.
Below are sample diagrams of drive malfunctioning.
Primary drive error during rebuild
Once data rebuild is complete, the LCD will display the following message to confirm
whether you wish to perform rebuild verification procedure.
Rebuild verification procedure confirmation screen
If you wish to perform the rebuild verification procedure, press the ENT button.
If you do not wish to do so, press the ESC button.
During the verification process, the LCD panel will display the percentage progression rate
of the verification. Below are sample diagrams.
Verifying Primary drive at
20% completion
Data being rebuilt from Secondary to
Primary position at 90% completion
Secondary drive error during rebuild
Normal operation state if do not
wish to perform verification or once
verification has completed.
SOHORAID SR2 Series User Manual
Verifying Secondary drive at
80% completion
English
Deutsch
Français
Español
中文
日本語
한국어
11