System Temperature Overheat And Fan Failure Management; Additional Display Messages Of System And Operation Procedures - Stardom SOHORAID SR2 Serie Manual Del Usuario

Once the verification process is complete, and the result shows there is an rebuilding error on
English
a drive, restart the SR2 to check and see that the drive is in fact malfunctioning. If it is, please
refer to chapter 5 "Hard Drive Replacement Instructions" to replace the malfunctioning drive.
Deutsch
Below are sample diagrams of drive malfunctioning.
Français
Español
Rebuilding error on Primary drive
中文
The SR2 allows shut down of power during the data rebuild and verification process, therefore,
日本語
if you turn off the power during both processes, the next time you turn on the power of the unit,
the system will automatically continue to process the remains. Please do not switch position of
the drive at any time.
한국어

9. System Temperature Overheat and Fan Failure Management

If the LCD panel displays "T" on the bottom right hand corner meaning the system
temperature has exceeded its allowance of 60℃ or "F" at the top right hand corner meaning
the system fan has malfunctioned and the audio alarm alerts, you may first press the MUTE
button to disable the audio alarm. At the allowed operational state, re-start the system to
double check and see if the problem is still present. If the problem persists, please turn off
the system and contact your supplier or the STARDOM tech support for further assistance.

10. Additional Display Messages of System and Operation Procedures

The SR2 frontal LCD panel is able to display additional messages such as firmware version,
system temperature and fan status by pressing the ▼ or ▲ buttons to make your selection.
Continuously pressing the selection buttons allows you to scroll through the menu. If not
pressed within 3 seconds, the display will revert back to its normal operational state.
12
System temperature exceeded
limitation
SOHORAID SR2 Series User Manual
Rebuilding error on Secondary drive
Note :
System fan malfunctioning
Firmware version message
System temperature message
System fan healthy message
System fan malfunctioning message