THERMEx VERTICAL PE 1050 Instrucciones De Montaje página 38

38 THERMEX VERTIcAL PE 1050
10
Drill the holes and install rawlplugs suitable
for the material into which they are installed.
13
Fix the hood to the wall by mounting the
screws in the locking holes.
16
Place the extraction hose on the hood.
NOTE: This does not apply if the hood is
used for recirculation.
11
x6
Mount the brackets on the duct.
14
x2
Replace the filters inside the hood.
17
Place the duct on the hood.
12
x4
x2
Mount the hood on the bracket.
15
The lid of the hood is closed by activating
and holding down the on/off icon until it
closes.
18
Pull up the top part of the duct and secure it
to the uppermost bracket to the duct using
two screws.
M 540211102211072018