Waeco MagicWatch MWE800 Instrucciones De Montaje Y De Uso página 42

_MWE-800-4F.book Seite 42 Freitag, 21. Juli 2006 4:28 16
Installing MagicWatch
6.6 Connecting the control box
Caution!
Make sure the polarity is correct.
On some vehicles, the reversing light only works when the ignition
is switched on. In this case, you must switch on the ignition in
order to identify the positive and earth wires.
➤ Connect the red cable (fig. 19.2, page 8) on the control box to the positive
wire (+) of the reversing light (fig. 19.1, page 8).
➤ Connect the black cable and the white cable (fig. 19.3 and fig. 19.4,
page 8) to the earth wire (–) of the reversing light or to earth (bodywork).
➤ Connect the blue cable (fig. 19.5, page 8) on the control box to the
terminal 15, (connected positive).
42
All manuals and user guides at all-guides.com
MagicWatch MWE800