Waeco MagicWatch MWE800 Instrucciones De Montaje Y De Uso página 40

_MWE-800-4F.book Seite 40 Freitag, 21. Juli 2006 4:28 16
Installing MagicWatch
Note
Pull the plugs of the connecting cables through the cable sleeve
before you insert the sleeve in the body work.
➤ Take suitable precautions to protect holes made in the bodywork from
water penetration, for example by spraying the cable and the sleeve with
sealant.
➤ Where possible, use existing rubber bungs for laying the connecting
cables.
If there are no rubber bungs, make a suitable hole with a diameter of
around 13 mm and insert a cable sleeve.
➤ Lay out the cables so that they cannot be damaged under any circum-
stances (e. g. by gravel impact).
➤ Carefully fasten the connecting cables behind the bumper.
➤ Attach the sensor plugs to the of the socket connectors of the connecting
cables.
6.4 Fastening the control box
Note the following information when selecting a location to mount the control
box:
Note the lengths of the sensor connecting cables.
The control box may not be damaged if you have luggage or objects in the
boot.
➤ Attach the control box to a suitable location in the boot or under the dash-
board.
The control electronics must not be exposed to any moisture.
➤ Insert the plugs of the sensor connecting cables into the corresponding
sockets of the control box (see fig. 10.2, page 6).
40
All manuals and user guides at all-guides.com
MagicWatch MWE800