Hamilton PULSOMATIC Manual Del Usuario página 4

Operating instructions
Functions
Your Hamilton Pulsomatic watch has the following functions:
• Digital display
Hours, minutes (24 h / 12 h)
Date (for 2 seconds)
24 h / 12 h display
1. Pull the crown out to position (p1), then immediately press the crown in to position (p0) and pull it out again
to position (p1): the display will indicate 24 H.
2. Change the display (24 H / 12 H) by turning the crown.
3. Push the crown back in to position (p0) to confirm the change.
Adjustment of hours and minutes
1. Pull the crown out to position (p1): the display will flash.
2. Adjust the hour by turning the crown rapidly in the desired direction (–/+).
3. Adjust the minutes by turning the crown slowly in the desired direction (–/+).
4. Push the crown back in to position (p0) to confirm the adjustments and synchronize the seconds.
4
All manuals and user guides at all-guides.com
© HAMILTON 2010 – INSTRUCTION MANUAL
Operating instructions
Display and adjustment of the date
1. Turn the crown rapidly in position (p0): the date will display for 2 seconds.
2. Immediately pull the crown out to position (p1): the display will flash and indicate the date and the month.
3. Adjust the date by turning the crown slowly in the desired direction (–/+).
4. Adjust the month by turning the crown rapidly in the desired direction (–/+).
5. Push the crown back in to position (p0) to confirm the adjustments.
Charging the accumulator
About 12 hours before the reserve of energy is completely used up, a triangular symbol will appear and flash to
indicate that it is time to recharge your watch before it stops functioning. It is possible to store your watch for
an extended period by pulling the crown out to position (p1). After around 12 minutes, the watch will go into
standby and lose its settings. To restart, push the crown in to position (p0) and turn it several times in a clockwise
direction.
© HAMILTON 2010 – INSTRUCTION MANUAL 5