Care And Cleaning - Haier HD90-A636-E Manual Del Usuario

EN
CAUTION!
Following maintenance activities must be carried out after each drying cycle.
Empty the water tank
Clean the lint filter
Clean the condenser fi lter
Empty the water tank
During operation, steam condenses to water which is collected in the water tank. The tank
must be emptied after each drying cycle.
If the tank is full:
the lamp will fl ash during the programme.
an acoustic signal will sound.
the programme will automatically interrupted; the laundry remains wet.
the „Start/Pause"
continue the programme.
1. Pull out the water tank from its housing. Hold the
tank horizontally (fi g.: 33).
2. Empty the water tank into a sink (fi g.: 34).
3. Reinstall the water tank to the tumble dryer. (fi g.:
35).
The tank can also be emptied during programme. To
continue the programme the "Start/Pause"
has to be pressed after the tank has been reinstalled.
The symbol only switches off after new programme
was started.
Notice
The condensed water can also be derived by a drain hose (enclosed or as an optional
accessory available at the customer service). The tank needs no longer be emptied (see
section ACCESSORY).
WARNING!
Do not use the water for any kind of drinking or food processing.

Care and cleaning

button must be pressed after the tank was emptied in order to
button
33 34
35
21