GRAPHITE 58G150 Manual Del Usuario página 12

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
NOTE: BEFORE THE POWER TOOL IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND
KEEP IT FOR FUTURE REFERENCE.
Always wear ear protectors when working with the screwdriver. Exposure to noise may deteriorate
your hearing.
The tool should be used with included additional handles. Loss of control may result in personal
injuries of the operator.
ADDITIONAL SAFETY GUIDELINES FOR THE CORDLESS SCREWDRIVER
Carefully read this instruction manual. before the screwdriver is used.
Screwdriver bits and drill must be maintained in good technical condition. Drills should be sharpened.
This will allow to reduce load of the screwdriver and ensure its durability.
Use screwdriver bits and drills recommended by the manufacturer only.
Any attempts to modify the screwdriver or its accessories are inadmissible.
Do not overload the screwdriver. Let the tool do the work alone. This will reduce wear of the screwdriver
and working tool, and ensure higher working efficiency and durability.
Do not use the power supply with damaged power cord. Such device should be repaired or replaced.
The surface of the charger and power tool should be always kept clean (with no traces of dirt or dust).
Always disconnect the charger from the mains and the tool from the charger before commencing any
work with the screwdriver (use, repair).
Do not use the rechargeable battery in the screwdriver for other purposes.
Do not attempt to dismantle the tool.
Do not expose the tool to excessive temperature or water.
When the screwdriver is not used for long periods of time, store it in cool and dry place.
Do not use the screwdriver, when its casing is found to be discoloured or damaged.
Do not discharge the battery completely. When the tool is not used for a long time, charge the battery
from time to time. Completely discharged battery may leak.
Do not put the Li-Ion batteries into fire or water. It may explode! Used battery should be taken to
recycling point suitable for this kind of products. Do not dispose of the battery to containers for
municipal wastes.
SPECIAL SAFETY CONDITIONS REGARDING THE CHARGER
Keep this instruction manual manual. It contains important safety instructions and rules for operation
of the charger.
Before the charger is used, read all relevant information contained in this manual, see markings on the
charger and the product it is designed for.
To reduce the risk of potential personal injury use the charger for Li-Ion batteries only. Other type
batteries may explode and cause personal injury or material damages.
Do not expose the charger to humidity or water.
The application of any connecting elements not supplied or not recommended by the manufacturer of
the charger may cause fire, personal injury or electric shock.
Make sure the power cord is not located in a pathway, is not exposed to treading or other danger (e.g.
strong tension).
Do not use the extension cord, if it is not absolutely necessary. Use of an improper extension cord may
cause fire or electric shock. If it is necessary to use extension cord, first make sure that:
- the extension cord socket matches plug prongs of the original power cord of the charger.
- the extension cord is in good technical condition.
Do not use the charger with a damaged cord or plug. Damage should be repaired by a qualified
person.
CORDLESS SCREWDRIVER
58G150
DETAILED SAFETY REGULATIONS
12