Care And Maintenance - Chicco Best Friend Instrucciones De Uso

by the manufacturer
• Do not use the reclined cradle with more than
one child at time.
• Never leave the reclined cradle on surfaces
that are not perfectly horizontal.
• Always supervise children playing near the
reclined cradle.
• To prevent fire hazards, do not leave the re-
clined cradle near sources of heat, electrical or
gas devices etc.
• Make sure that the cover is properly secured
to the structure of the chair.
• WARNING: Before lifting and carrying the re-
clined cradle, always bring back and lock the
handle in the vertical position "B".
• Periodically check for any worn parts, loose
screws, worn or unstitched materials and re-
place any damaged parts immediately.
• Do not place the reclined cradle with your
child in it near windows or walls where strings,
curtains or other objects could be used by the
child to climb or pose choking or strangling
hazards.
• To avoid the risk of your child overbalancing
and falling do not place the reclined cradle
near windows or walls.
• Keep the product out of reach of children
when it is not being used.

CARE AND MAINTENANCE

• This product requires periodical maintenance.
The cleaning and maintenance of the product
must only be carried out by an adult. Periodi-
cally inspect the baby reclined cradle to check
for broken, torn or missing parts: do not use
it in this case.
• The belts, buckle and plastic parts need to be
cleaned only with a damp cloth. Do not use
solvents or detergents that may damage or
make them unsafe.
• Do not immerse the child car seat in water;
dry the metal parts to avoid rusting.
• Please refer to the care label for instructions
on washing the fabric:
Handwash in cold water
30° C
Do not bleach
C
All manuals and user guides at all-guides.com
Do not tumble dry
Do not iron
Do not dry clean
• Check that the fabric and stitching are in good
condition each time you wash it.
• Prolonged exposure to direct sunlight can
cause the fabric to fade.
REMOVING THE FABRIC FROM THE CHILD
CAR SEAT
The lining of the child car seat is washable. To
perform this operation, you need to remove it
the structure of the child car seat.
1. Move the handle to a vertical position and
remove the hood by releasing it from the rel-
evant hooks and buttons (Fig. 20).
2. Release the plastic flaps located near the
handle joints with the belts unfastened (Fig.
21).
3. Pull off the lining from the front of the seat,
taking care to remove the lining at the belt
adjustment button (Fig. 22); release the fabric
from the belt guides (Fig. 23).
4. Lift the fabric from the back of the child car
seat, pull off the shoulder straps and crotch
strap from the fabric.
5. To fit the lining on the child car seat again,
repeat the steps described above in reverse
order.
FASTENING THE CHILD CAR SEAT ON THE
STROLLER
The Child Car Seat can be attached ONLY on
the BEST FRIEND stroller.
6. To fasten the Child Car Seat, remove the
stroller or carrycot seat, if present.
7. Hold the handle in the transport position
(Fig. 24) and position the Child Car Seat on
the lateral hooks of the stroller with the foot
zone facing rearward. Ease it on the frame
until you hear a click (Fig. 25).
WARNING: Before use, ensure that the Child
Car Seat is properly fastened by pulling up on it.
8. To release the Child Car Seat from the stroller,
put the handle in the vertical position (trans-
19