Urmet iPercom 1761/31 Manual De Instalación página 6

ENGLISH
IMPORTANT The firmware version of the Ipercom system must be 2.1.0 or higher for the operation of
the device. The firmware version update of the Ipercom system is available on the Urmet website in the
Download/Software section (registration required).
The IP video door phone Ref.1761 /31 or /33 is a device dedicated to Ipercom system.
For trouble-free operation, the device requires a LAN/POE-type connection.
1. DESCRIPTION OF COMPONENTS AND CHARACTERISTICS
3
2
1. Backlit blue Home button
2. Speakers
3. 7" touchscreen display
4. Webcam 2 Mpx
5. Microphone
6. Micro SD card
7. Switch
for IPerHOME
(IPERHOME TERM)
Video door phone is provided with an embedded device for hard of hearing.
2. DESCRIPTION OF THE TERMINALS ON THE PRINTED CIRCUIT
FOR CONNECTING TO THE SYSTEM
1. 12 way connector used for video door phone connection to the printed circuit
2. Terminals for the connection of:
• panic alarm (PANIC)
• floor call (FC)
• call repeater (S+, S-)
3. Terminals for connection to the IPerHOME system (-V, +V, -B, +B)
Do not use: pre-setting for future functions.
4. External power supply terminals (+, -)
6
4 5
1
bus termination
1
4
6
8. 12 way connector for external connections'
printed circuit
9. Secondary
IPerHOME connection (LOCAL LAN PORT)
10. Video door phone locking latch
11. LAN connector with POE power supply
(DOORPHONE POE PORT)
FC
S- S+ PANIC
2
3
-V +V -B +B
+ -
7 8
11 10
LAN connector
9
for Internet
DS1761-004B