Warranty Terms And Conditions; Guidance And Manufacturer's Declaration: Electromagnetic Emissions - Foreo ESPADA Manual Del Usuario

WARRANTY TERMS AND CONDITIONS

REGISTER WARRANTY: To activate your 2-Year Limited Warranty, register the number provided
on the FOREO Magnetic Card at www.foreo.com/support.
2-YEAR LIMITED WARRANTY: FOREO warrants this device for a period of TWO (2) YEARS after
the original date of purchase against defects due to faulty workmanship or materials arising
from Normal Use of the device. The warranty covers working parts that affect the function of
the device. It does NOT cover cosmetic deterioration caused by fair wear and tear, or damage
caused by accident, misuse or neglect. Any attempt to open or take apart the device (or its
accessories) will void the warranty. If you discover a defect and notify FOREO during the
warranty period, FOREO will, at its discretion, replace the device free of charge. Claims under
warranty must be supported by reasonable evidence that the date of the claim is within the
warranty period. To validate your warranty, please keep your original purchase receipt together
with these warranty conditions for the duration of the warranty period. To claim your warranty,
you must log in to your account at www.foreo.com then select the option to make a warranty
claim. Shipping costs are nonrefundable. This undertaking is in addition to your statutory rights
as a consumer and does not affect those rights in any way.
FOR AUSTRALIA-BASED CUSTOMERS ONLY: Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure. Australia Office,
FOREO Oceania, Level 1, Suite 10, 1014 Doncaster Road, Doncaster East, VIC, 3109, Australia.
TEL +61 (0) 448 885 779
DISPOSAL INFORMATION: Battery must be recycled or disposed of properly. Disposal of
old electronic equipment (applicable in the EU and other European countries with separate
waste collection systems). The crossed-out dustbin symbol indicates that this device should
not be treated as household waste, but rather be brought to the appropriate collection point
for recycling of electrical and electronic equipment. Please see back page for instructions on
how to remove the battery.
BATTERY CARE: It is recommended to regularly use the device to ensure proper performance.
ESPADA should be fully charged at least every 3 months to maintain the battery.
™

GUIDANCE AND MANUFACTURER'S DECLARATION: ELECTROMAGNETIC EMISSIONS

& IMMUNITY: Medical electrical equipment requires special precautions regarding EMC
and must be installed and put into service according to EMC information provided in this
document. Portable and mobile RF communications equipment can affect the medical
electrical equipment. This declaration currently applies to ESPADA
GUIDANCE AND MANUFACTURER'S DECLARATION: ELECTROMAGNETIC EMISSIONS: The
device is intended for use in the electromagnetic environment specified below. The customer
or the user of the device should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 15
RF emissions
CISPR 11
WARNINGS:
• This device should not be used adjacent to other high field equipment or areas. If
adjacent use is necessary, the device should be observed to verify normal operation in the
configuration in which it will be used.
• This device should not be used adjacent to high-frequency equipment. If the device is
adjacent to a short wave device or microwave device, the device's output may be unstable.
• The use of accessories other than those specified for the device is not recommended as it may
result in increased emissions or decreased immunity of the device.
• The device is intended for use in the electromagnetic environment specified below. The cus-
tomer or the user of the device should assure that the device is used in such an environment.
IEC60601-1-2
Immunity test
test level
Electrostatic
Discharge(ESD)
IEC 61000-4-2
Electromagnetic
field susceptibility
IEC61000-4-3
Power frequency
(50/60 HZ
Magnetic field
IEC 61000-4-8
Radiated 40 dBµV/M (3M)
emission 30MHZ ~ 230MHZ
47 dBµV/M (3M)
230MHZ~ 1000MHZ
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless),
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which ESPADA
exceeds the applicable RF compliance level above, the device should be observed to verify
4
Compliance
Group 1
Group 2
± 6kV contact
± 8kV air
3V/m
3A/m
Electromagnetic environment-guidance
The device is supplied by very low voltage Li-on battery.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
The device does not need to use an AC adapter to charge,
so it's radiated power is very low.
Compliance
level
± 6kV contact
± 8kV air
3V/m
3A/m
40 dBµV/M (3M)
30MHZ ~ 230MHZ
47 dBµV/M (3M)
230MHZ~ 1000MHZ
device.
™
Electromagnetic environment
guidance
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Because it is not life-supporting
equipment, it does not use only
shield location.
Power frequency magnetic fields should
be at levels characteristic of a typical
location in a typical commercial
or hospital environment.
In all frequencies, the radiated
strength is less than limited value.
device is used
™