Bosch GWS13-52TG Instrucciones De Funcionamiento Y Seguridad página 10

Installing and Removing Wheels
1. Loosen and remove guard cover lock knob
(Fig. 4).
2. Push raised portion of guard cover near
locking clip (Fig. 4) in direction of arrow to
unlock guard cover, and swing cover out of
the way (Fig. 5).
3. Place the backing flange (provided together
with the guard) on the spindle (Fig. 5). Turn
flange until it is securely in place at the base
of the spindle.
4. Place the wheel onto the spindle and align
the arbor hole of the wheel with the shoul-
Fig. 4
Fig. 5
GUARD
COVER
VIEWING
WINDOW
WHEEL
GUARD
der of the lock nut (provided together with
the guard).
5. Tighten lock nut with supplied lock nut
wrench while holding spindle lock.
6. Return guard cover back to its original po-
sition and push into locking clip to secure
guard cover in place (Fig. 4).
7. Replace guard cover knob and securely
tighten knob (Fig. 4).
To remove reverse procedure.
GUARD COVER
KNOB
OpEN
LOCKING
HERE
CLIp
DUST pORT
10
GUARD
COVER
VACUUM
HOSE
ADApTER
(OpTIONAL)
LOCK NUT
DIAMOND
WHEEL
BACKING
FLANGE
SpINDLE