Cleaning And Maintenance; Technical Data - camry Premium CR 4083 Manual De Uso

clockwise to the locked position (closed padlock symbol) (4).
2. Cover the jug (5) with the lid (2). Pull the lid using the lid ring (3) until it moves over the handle.
3. Place the measurement cup (1) into the lid (2). Turn the cup clockwise until its locked in the position.
NOTE: Before each use you need to place the lid and the measure cup on the jug.
NOTE: The jug assembly is not prepared to disassemble by the home user. Disassembling may break the safety lock feature (4).
NOTE: Blender has a safety lock (4) feature. If the blender jug (5) is not properly assembled device will not operate.
III - HOW TO USE:
1.Place assembled blender on stable, flat surface.
2. Make sure the speed adjustment knob (8) is set to the OFF position ("0").
Knob marking:
0 – OFF: turn off the unit.
1 – Low speed: suitable for soft food blending.
2 – High speed: suitable for hard pieces of food.
P – Pulse: suitable for short-time blending (a few seconds). Use it if some of the food pieces are too hard to blend, or stuck.
When you move the knob to the pulse setting, blender runs at its highest speed as long as you keep pushing it. Recommended to use
for ice crushing.
NOTE: To crush the ice move the knob to "P" position for about 1 second, and then wait at least 2-3 seconds before repeat.
3. Place assembled jug (5) on the motor base (7).
4. Remove the lid (2) from the blender jug (5), put the ingredients in for mixing. In order to avoid overflow, the level of ingredients in the
jug (5) should not exceed ¾ of jug's height. Close the lid (check ASSEMBLY point 2 for the details).
5. Connect the power plug to the power outlet.
6.Turn the device on by rotating speed adjustment knob (8) to chosen speed.
NOTICE: During operation always hold the jug (5) with a hand.
7. When the mixed products have proper consistence, turn the device off by rotating speed adjustment knob (8) to the OFF position.
Wait until the blades stop moving. Remove the power plug from the power socket. Remove the lid.

CLEANING AND MAINTENANCE

Make sure that the device is disconnected from the power.
1.Fill the jug with water to half of its volume. Add a few drops of dishwashing liquid.
2.Turn speed adjusting knob to ON, then push the Pulse knob several times in a row.
3.Remove the jug (5) from the motor base (7), empty and rinse under running water.
4. Set aside to dry.
5. Clean the motor base (7) with moist cloth, and then wipe dry.
NOTICE: Don't immerse motor base (7) in water or other liquids.
NOTICE: Do not wash any blender parts in dishwashers.

TECHNICAL DATA

Power: 1000W
Max. Power: 2200W
Voltage: 220-240V~ 50/60Hz
Recommended operation time: max 1 minute turned on + 10 minutes turned off.
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
SICHERHEITSBEDINGUNGEN
WICHTIGE HINWEISE ZUR SICHERHEIT DES GEBRAUCHS
BITTE SORGFÄLTIG LESEN UND FÜR ZUKÜNFTIGE BEZUG AUFBEWAHREN
Die Garantiebedingungen gelten abweichend, wenn das Gerät gewerblich genutzt wird.
1.Bevor Sie das Produkt verwenden, lesen Sie bitte die folgenden Anweisungen sorgfältig
durch und befolgen Sie sie immer. Der Hersteller haftet nicht für Schäden durch
Missbrauch.
2. Das Produkt ist nur für den Heimgebrauch. Verwenden Sie das Produkt nicht für einen
(DE) DEUTSCH