Placement Of The Ice Machine - GE UCC15 Manual Del Propietario E Instrucciones De Instalación

PLACEMENT OF THE ICE MACHINE

The ice machine is supplied with a power cord. Do not
remove the grounding pin from the cord's plug. Do not
machine so its own 115v, 15amp circuit.
1. If the electrical outlet for the ice maker is behind
the unit, plug it into the unit.
2. Position the unit in the installation opening.
3. Turn on the water supply. Make sure that the
icemaker is plugged in and the power is on.
4. Slide the unit into the installation opening, paying
special attention to water supply and drain
connections. Do not kink!
49-60745-3
All manuals and user guides at all-guides.com
Installation Instructions
5. Pour a couple of quarts of water into the ice
drain pump should start and water should pump
out. Check for leaks.
6. Replace the service access panel.
15