Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Timing Chain Riveting Tool for Mercedes
TOOLS
1
Disassembly pins,
to be used as OEM 602589046301
2
Assembly link for 4 mm Simplex chain,
to be used as OEM 602589026300
3
Assembly link for 4 mm Duplex chain,
to be used as OEM 602589026300
4
Locking clip & plate for 4 mm assembly link,
to be used as OEM 602589026300
5
Assembly link for 3 mm Simplex chain,
to be used as OEM 602589024000
6
Assembly link for 3 mm Duplex chain,
to be used as OEM 602589024000
7
Locking clip & plate for 3 mm assembly link,
to be used as OEM 602589024000
8
Pressure piece for 4 mm chain pin
9
Pressure piece for 3 mm chain pin,
to be used as OEM 112589069300
10 Pressure piece, to be used as OEM 602589026300
11 Pressure piece, to be used as OEM 103589016300
12 Rivet pressure piece for 4 mm chain pin
13 Rivet pressure piece for 3 mm chain pin,
to be used as OEM 602589036300
14 Pressure piece, to be used as OEM 602589026300 / 8947
15 Chain riveting tool, to be used as OEM 602589003300
16 Fastening screw for pressure pieces
17 Chain separating tool, to be used as OEM 602589023300 / 9312
18 Separating spindle for 4 mm chain pin, to be used as OEM 602589046300
19 Separating spindle for 3 mm chain pin, to be used as OEM 602589046300
INTENDED USE
The riveting tool serves the renewal or riveting of Simplex or Duplex timing chains with 3 mm or 4 mm
chain pins. Using the old chains, the new timing chain is pulled over the chain sprockets and at the
end riveted; this omits the dismantling of the timing chain box.
SAFETY INFORMATION
• Do not use the tool if parts are missing or damaged.
• Use the tool for the intended purpose only.
• Never place the tool on the vehicle battery. Danger of short circuit!
• Caution when working on the running engines. Loose clothing, tools and other objects may be caught by
rotating parts and cause severe injuries.
• Keep children and other unauthorised persons away from the work area.
• Do not let your children play with the tool or its packaging.
• Be careful when working on hot engines because of the risk of burn injuries!
• If you remove the ignition key before repairing, you can prevent the engine from being started accidentally
and resulting in engine damage.
• This manual serves as a brief guide and does not replace a workshop manual. Always refer to the vehicle-
specific service literature, particularly the technical data such as torque values and instructions for
disassembly/assembly, etc.
• After repair or before starting the engine, turn a minimum of 2 turns by hand and check the timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 8848
1
1
1
1
8
2
3
9
6
5
10
11
12
16
13
14
17
18
11
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
4
7
6
15
19
Tabla de contenido
