Tecno-gaz FOCUS Manual Del Usuario página 33

ENGLISH
Once the battery has been inserted, the lamp will turn on automatically. Press
1.
nay button when the LCD display is on stand‐by.
Select the mode to be used and the desired time, by using the control button
2.
(pos. B).
Adjust volume as follows:
1. Hold the control button pressed for a couple of seconds
2. Now adjust the desired volume by means of the controls to the side of the
device.
Press the START button (pos. A – Fig. 4) and select the desired mode.
Press any button if you wish to interrupt treatment.
An audible signal will indicate the difference in time spent.
The icon on the display shows remaining battery power. Recharge or replace the
battery when the display shows the words 'LOW BATTERY'.
TURNING THE LAMP ON
A
VOLUME ADJUSTMENT
STARTING TREATMENT
BATTERY ICON
B
14
Pct. 4