Figure 6
device with a differential trip current lower than 30 mA.
mal overload protection and can be connected directly to the
mains. NB: if the motor is overloaded it stops automatically.
Once it has cooled it starts again automatically without requi-
ring any manual intervention.
occur, have the repair or replacement carried out by speciali-
sed, qualified personnel
The length of the power cable on the pump limits the
maximum depth of immersion in use of the pump.
8. START-UP
The pump has an adjustable electronic level sensor for operation
in automatic (a) or manual (b) mode.
-
GB
ENGLISH
25