Use Instructions For Dicing - Waring Commercial VCM1000SK Manual De Instrucciones

This is described above. Stack food items in the small food chute. Position
small food pusher at the top of the stack.
• Be sure the unit is off by pushing and releasing the PULSE/OFF (
• Insert the power cord plug into a properly grounded outlet of the correct
voltage. Red LED will turn on.
• Use the "ON" ( ) switch for continuous processing, or the PULSE/OFF
( ) lever for pulsing /on-off operation.
• Feed the items to be processed at a steady rate into the feed tube, using the
food pusher to push the food down. The same technique is used whether you
choose to use the large pusher or the small pusher. Avoid excessive force
when using either one of the food pushers. Too much force may cause food
items to jam in the feed tube or damage the machine. ALWAYS USE THE
LARGE FOOD PUSHER TO PUSH FOOD ITEMS DOWN INTO THE LARGE
FEED TUBE. In the same way, ALWAYS USE THE SMALL FOOD PUSHER
TO PUSH FOOD ITEMS DOWN INTO THE SMALL FEED TUBE. NEVER
PUT FINGERS, SPATULAS, OR OTHER UTENSILS INTO THE LARGE
FEED TUBE OR THE SMALL FEED TUBE CHANNEL.
• Note that the pusher has a safety mechanism. When pusher is removed, unit
will turn off. Once pusher is inserted in chute, unit will automatically turn back
"On" ( ).
• Never use the small food pusher in the large feed tube.
• When the bowl is full and /or you have finished your processing task with
the bowl or continuous feed chute, press the PULSE/OFF (
let the processing disc come to a complete stop. Unplug the unit. NEVER
STOP THE FOOD PROCESSOR BY REMOVING THE PLUG FROM THE
OUTLET OR BY REMOVING THE COVER. ALWAYS STOP THE UNIT BY
PRESSING THE "PULSE/OFF" SWITCH.
• Follow disassembly instructions for the bowl and continuous feed chute as
appropriate. These are described in the section titled "Disassembly of Batch
Bowl Parts" page 5, or the section titled "Disassembly of the Continuous
Feed Chute Parts" page 7.
When processing, it is recommended that the machine be operated on a 50%
duty cycle, such as 5 minutes on / 5 minutes off. This can be accomplished
by processing for 5 minutes, then doing 5 minutes of food preparation.
Please remember to turn off the machine when not in use.
• The dicing operation requires that product be sliced both horizontally and
vertically by the machine. The smaller the dice required, the more difficult
the cut is to achieve. Soft or juicy product will tend to mush if the dice is too
small or the produce is too soft. Cheese and meat is the opposite extreme.
Because of the consistency of cheese and meat, it is not recommended that
All manuals and user guides at all-guides.com

USE INSTRUCTIONS FOR DICING

(Dicing kit - sold separately)
11
) lever.
) lever and