Introduction To Lea Protection Configuration; Creating A Ne Lea Protection Automation; Creating Or Changing A Leak Protection Automation And Selecting Members - Schell SWS Instrucciones De Montaje

Introduction to lea protection confi guration

Creating or changing a leak protection automation and selecting members

1 Introduction to lea protection confi guration
The SWS lea protection fi tting remains permanently closed if no opening
times have been programmed for the fi tting.
During lea protection confi guration, the actuated lea protection fi ttings are
confi gured as ell as the times during hich the fi tting ill be opened.
Various time slots and/or opening signals can be set up, hich can also overlap
ith one another. Accordingly, the lea protection fi tting ill be opened at the
times for hich at least one opening signal has been confi gured.
The procedure for the confi guration of lea protection is described in the
f ollo ing sections.
2 Creating a ne lea protection automation
2.1 C reating or changing a lea protection automation and selecting
members
Path: Lea protection Create Ne Member
» As a fi rst step, you select the members (one or more lea protection fi ttings
that ill be used to shut off the drin ing ater installation) and then save
your selection.
Abb 14: Selecting members
EN
45