Tabla de contenido
Idiomas disponibles
Idiomas disponibles
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
pm2.5 Detector
Model
SBS-PM2.5
Power supply
3.6V NiMH 1600mAh
Detection range PM2.5
0-999.9 μg/m
Resolution PM2.5
0.1 μg/m
Detection range PM10
0-999.9 μg/m
Resolution PM10
0.1 μg/m
Minimum particle diameter
0.3 μm
Accuracy
±20% lub ±15μg/m
Dimensions [mm]
195x95x47
Weight [kg]
403
Operating time [h]
About 30
Operating temperature[° C]
5-45
Storage temperature[° C]
(-20) – (+70)
1. ALLGEMEINE BESCHREIBUNG
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
EN
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to < pm2.5 detector >.Prevent
the device from getting wet. Risk of electric shock! Do
not cover air inlets / outlets! Do not use the device in an
inflammable or explosive environment. Do not use it in an
environment with extreme humidity and temperatures or
radioactive gases. Do not use it in fog, smoke, steam or
clusters of high concentrations of particles.
3
2.1. ELECTRICAL SAFETY
Applies when the device is connected to the charger.
3
a)
The plug must fit the socket. Do not modify the
3
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
3
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
MAX
3
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
and
f)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
h)
Using incompatible chargers may result in fire,
explosion or other hazards. Do not use damaged
chargers.
i)
Do not charge the device if the battery compartment
is damaged or open.
j)
Do not charge the device if the power cord is
damaged or shows obvious signs of wear.
k)
Do not touch the device with wet or damp hands
when it is being charged.
l)
Do not immerse the device or power cord in water
or pour water over it, especially when connected to
power supply.
2.2. SAFETY IN THE WORKPLACE
a)
If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
b)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
c)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out. Applies when the
device is connected to the charger.
d)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
e)
Keep packaging elements and small assembly parts
in a place not available to children.
f)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
6
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device out of the reach of children.
d)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
e)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
f)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
g)
Keep the device away from sources of fire and heat.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed to measure the amount of dust
particles suspended in the air, in the space being tested.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
ATTENTION! This product's view can be found on
the last pages of the operating instructions (pp. 24.)
FRONT PANEL
1.
measurement in the real-time mode.
2.
POWER: Press and hold the button for 2 seconds to
turn the device on / off.
3.
BACK: Press the button to return to the main menu.
4.
DOWN: Press the button to move the cursor down.
5.
ENTER: Press the key to go to the selected menu
item.
6.
UP: Press the key to move the cursor up.
7.
Display
UPPER PANEL
8.
Outlet of tested air PM2.5.
9.
Power cord socket
10.
Red LED: lights up when charging.
11.
Green LED: lights up when the device has been
charged.
12.
Inlet of tested air PM2.5.
3.2. DEVICE USE
Charging
The device is equipped with a battery. To charge it, use
a dedicated USB cable connected to a 5V charger or directly
to a USB port on your computer. Any voltage greater than
5V can cause damage to the device or even a fire.
Note: Do not block the air inlet and outlet during the
measurement. If the device stops functioning properly or
stops responding to commands, it is recommended that
you force the device to turn off. To do this, use a thin, long
object to press the button behind the opening on the back
of the device.
LVL1
good
0-35 ug/m
LVL2
moderate
36-75 ug/m
LVL3
unhealthy-
76-115 ug/m
LVL4
unhealthy
116-150 ug/m
LVL5
unhealthy+
151-250 ug/m
LVL6
unsafe
>250 ug/m
Main menu
After starting the device, the main menu is displayed.
Press the UP or DOWN button to select one of the available
modes
•
Real Time Mode (measurement in real time)
•
Set Parameter (parameter settings
then press "ENTER" to switch to the selected mode.
Real Time Mode
After selecting the real-time measurement mode, the
following screen will be displayed:
After pressing the RUN / STOP button, the device will start
the measurement and end it after 30 seconds (this is the
default measurement time, if another measurement time is
required, it can be changed in the parameter setting mode).
After the measurement is completed, the number of
particles in the tested air will be displayed and the display
will alternate between the measurement time and air
quality.
Parameter setting
After selecting the parameter setting mode, the following
screen will be displayed:
7
3
3
3
3
3
3
EN
Tabla de contenido
