Carbon Brushes - Metabo STE 135 Plus Instrucciones De Manejo

STE/STEB 135 Plus NAFTA
ENGLISH
Hints and Tips
Sawing various materials
When sawing metal, first lubricate the saw blade
with a Metabo lubricating stick. Saw sheet metal
less than 1/16" thick supported on a wooden
backing plate.
MAINTENANCE
Be aware of the danger of injury represented by
the sharp saw blade. All maintenance operations
must be carried out with the saw blade at rest.
Switch off the jig saw and remove the plug from
the electrical outlet. Clean the air intake aperture
behind the grooved roller supporting the saw
blade as required. From time to time lubricate
the roller with a drop of oil. Have the carbon
brushes replaced by Metabo or in an Authorized
Metabo Service Center.

CARBON BRUSHES

When the brushes of the jig saw are worn
beyond a certain limit the motor will not start on
being switched on again after being switched off.
Servicing
Each time the carbon brushes need replacement
the jig saw should be thoroughly inspected and
the motor cleaned. This work should only be
done by skilled personnel, i.e. an Authorized
Metabo Service Center.
ACCESSORIES
Use original Metabo accessories only as listed in
the Metabo power tool catalog.
Caution: The use of any other accessories or
attachments might present a hazard.
6
18.12.2007 11:41 Uhr
All manuals and user guides at all-guides.com
Seite 6
WARNING
Metabo reserves the right to reject under the
warranty program any tool repaired or altered by
the user or an unauthorized service station.
In the USA :
Metabo Corporation
1231 Wilson Drive
P.O. Box 2287
West Chester, PA 19380
Tel: 800-638-2264
Fax: 800-638-2261
e-mail: [email protected]
In Canada :
Metabo Canada Inc.
190 Britannia Road East
Mississauga, ON
L4Z 1W6
Tél. : (905) 755-0608
Fax : (905) 755-0611
Tel. : (toll free) 1 877 metabo1
(1 877 638-2261)
Fax : (toll free) 1 877 metabo9
(1 877 638-2269)