Idiomas disponibles
Idiomas disponibles
WARNING
Serious injury or death can occur from the rack tipping over. To prevent this, the rack must be
secured to a wall, especially in earthquake-prone areas, where surfaces are uneven, and where
children and/or pets are present.
Different wall materials require different types of fasteners. Use fasteners suitable for your
specific type of wall. If you are uncertain about what type of fastener to use, then please contact
your local hardware store.
WARNING
Never exceed the following weight limits for the drawer, rack, and cord minders:
1.
Maximum load for the drawer: Up to 120 lb. (54.43 kg) when evenly distributed.
2.
Maximum load for each shelf: Up to 1,000 lb. (453 kg) when weight is evenly distributed.
3.
It is recommended that the heaviest load be placed on the bottom shelf.
4.
Maximum load per cord minder set is 50 lb. (22.6 kg).
5.
Immediately remove the load should there be separation between the cord minder and the
mounting bracket.
6.
Immediately remove the load should there be damage, bending or warping of the rack uprights
or the cord minders.
ITEM DESCRIPTION
1
Vertical Beam
2
Pre-Bolted Vertical Assembly
3
Vertical Assembly Bolt
4
Crossbeam
5
Shelf Support Strap
6
Safety Strap with Weld Nut
7
Safety Strap Bolt
8
Laminate Deck
9
Wire Grid
10
Locking Pin
11
Carriage Bolt
12
10 mm Nut
13
10 mm Wrench
14
4 mm Hex Key
15
4 mm Hex Bit
16
Wall Mount Bracket Assembly
17
Stacking Plate
WALL MOUNT BRACKET SAFETY
WEIGHT LIMIT SAFETY
PARTS LIST
QTY.
12
16
41
ITEM DESCRIPTION
4
18
Locking Grid Clip
4
19
Fold Up Drawer
8
20
Drawer Pull
8
Mounting Bracket with
21
Drawer Slides
22
Drawer Carriage Bolts
8
23
Drawer Carriage Nut
24
Metal Pegboard
2
25
Pegboard Mounting Beam
2
26
Side Mounting Bracket (Right)
27
Side Mounting Bracket (Left)
4
28
Rear Mounting Bracket (Right)
4
29
Rear Mounting Bracket (Left)
1
30
Small Locking Pin
1
31
Pegboard Tool Hangers
1
2
32
Cord Minder Bracket
4
4
QTY.
8
1
1
2
4
4
1
2
2
2
2
2
8
6
2
Capítulos
