Cordless Circular Saw - Worx WT525 Manual Del Usuario

Ocultar thumbs

Contenido

página de 55

/ 55
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

SAFETY INSTRUCTIONS

WARNING! Read and understand all instructions. Failure to follow all instructions

listed below, may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS

1. WORK AREA

a) Keep your work area clean and well lit. Cluttered benches and dark areas invite ac-

cidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dusts. Power tools create sparks which may ignite the dust

or fumes.

c) Keep by-standers, children, and visitors away while operating a power tool. Dis-

tractions can cause you to lose control.

2. ELECTRICAL SAFETY

a) A battery operated tool with integral batteries or a separate battery pack must be

recharged only with the speciﬁed charger for the battery. A charger that may be suit-

able for one type of battery may create a risk of ﬁre when used with another battery.

b) Use battery operated tool only with speciﬁcally designated battery pack. Use of

any other batteries may create a risk of ﬁre.

3. PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use tool while tired or under the inﬂuence of drugs, alcohol,

or medication. A moment of inattention while operating power tools may result in serious

personal injury.

b) Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep

your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or

long hair can be caught in moving parts. Keep handles dry, clean and free from oil and

grease. Rubber gloves and non-skid footwear are recommended when working outdoors.

c) Avoid accidental starting. Be sure switch is in the locked or "OFF" position before

inserting battery pack. Carrying tools with your ﬁnger on the switch or inserting the bat-

tery pack into a tool with the switch "ON" invites accidents.

d) Remove all adjusting keys and wrenches. Make a habit of checking that adjusting keys,

wrenches, etc. are removed from the tool before turning it "ON" .

e) Do not overreach. Keep proper footing and balance at all times. Proper footing and

balance enable better control of the tool in unexpected situations.

f) Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,

hard hat, or hearing protection may be used for appropriate conditions.

g) Keep hands away from all cutting edges and moving parts.

h) If devices are provided for the connection of dust extraction and collection facili-

ties, ensure these are connected and properly used. Use of these devices can reduce

dust-related hazards.

4. TOOL USE AND CARE

a) Use clamps or other practical way to secure and support the work-piece to a

stable platform. Holding the work by hand or against your body is unstable and may lead to loss

of control.

b) Do not force tool. Use the correct tool for your application.The correct tool will do the